Page Loader

Plastic Display Pallet - 1200 x 800 mm

Plastic Display Pallet - 1200 x 800 mmThe 1200 x 800 mm plastic display pallet has 4-way entry for ease in handling and is ideal for high-speed automation systems, with its consistent specification. Its anti-slip surface avoids slipping even when wet and the absence of lips allow for full use of the pallet's surface.
Plastic Display Pallet - 1200 x 800 mmPlastic Display Pallet - 1200 x 800 mmPlastic Display Pallet - 1200 x 800 mm

Protect goods from damage and contamination - all pallets are constructed from Contamination-free Materials (DIN 10503 and EHEDG), are hygienic and will not absorb moisture so are a suitable platform for packed food

Enhance productivity during storage and transport with consistent 4-way entry design ensuring compatibility with all standard equipment

Reduce occupational health and safety risks to the workforce through ability to safely rack (on 1200mm side) and carry heavy loads

Maximise top deck space with no protruding lips allowing full use of the pallet

Increase logistics efficiencies with compatibility for crates and trays – providing a total plastic system

Dimensions - in millimetres- in inches
Length Width Height
  1200 800 160
Length Width Height
  47.2 31.5 6.3
Window / Pallet entry - in millimetres- in inches
Width Height
1200 mm side 315 100
800 mm side 225 100
Width Height
47.2 in side 12.4 3.9
31.5 in side 8.9 3.9
Nominal Capacity and Weight
Tare weight 22  kgs
Tare weight 48.5  lbs
Configuration and Stacking
  • CHEP recommends a maximum rating of 1000 kgs as a safe working load and not to exceed 4000 kgs when stacking loaded pallets on a solid, flat surface (e.g. four pallets high with 1000 kgs each)
  • Pallets can be racked under the outside blocks with 1000 kgs load up to 40°C for 1 month without deflection exceeding 21 mm
Temperature Range
Minimum / Maximum -35 °C / 40 °C
Minimum / Maximum -31 °F / 104 °F

Notes

Materials Virgin High Density Polyethylene (HDPE), with metal reinforcements. The pallet is highly resistant to migration.
Handling
  • Maximise the use of the pallet surface
  • Minimise lifting from the undersides of the skids
  • Rack the pallets under the outside blocks
  • The pallet should not be directly racked from under the apertures of the pallet base, as shown in the figure opposite

Can be used on all materials handling equipment, designed for 800 x 1200 mm wooden pallet.

The pallet should not come into direct contact with the following substances: Benzene based compounds, Chlorine based compounds, Oleum, Nitric Acid, Bromic Acid, Methyl Bromide. (Please consult CHEP for specific advice).

It is the responsibility of all users and hirers to ensure that any other users to whom they pass on the pallet are advised of the contents of this specification sheet.

Performance and Standards This pallet has been tested based on relevant parts of ISO 8611-1991, JISz 0606 and ASTM. D1185-94 Compliance