Overview
The 1200 x 800 mm plastic display pallet has 4-way entry for ease in handling and is ideal for high-speed automation systems, with its consistent specification. Its anti-slip surface avoids slipping even when wet and the absence of lips allow for full use of the pallet's surface.
Features and Benefits
Protect goods from damage and contamination - all pallets are constructed from Contamination-free Materials (DIN 10503 and EHEDG), are hygienic and will not absorb moisture so are a suitable platform for packed food
Enhance productivity during storage and transport with consistent 4-way entry design ensuring compatibility with all standard equipment
Reduce occupational health and safety risks to the workforce through ability to safely rack (on 1200mm side) and carry heavy loads
Maximise top deck space with no protruding lips allowing full use of the pallet
Increase logistics efficiencies with compatibility for crates and trays – providing a total plastic system
Specifications
Dimensions - in millimeters Dimensions - in inch
LWHExternal1200 47.2800 31.5160 6.3Window / Pallet entry - in millimeters Window / Pallet entry - in inch
WH1200 mm side 47.2 in side315.0 12.4100.0 3.9800 mm side 31.5 in side225.0 8.9100.0 3.9Nominal Capacity and Weight
Tare weight22 kgs 48.5 lbsConfiguration and Stacking
- CHEP recommends a maximum rating of 1000 kgs as a safe working load and not to exceed 4000 kgs when stacking loaded pallets on a solid, flat surface (e.g. four pallets high with 1000 kgs each)
- Pallets can be racked under the outside blocks with 1000 kgs load up to 40°C for 1 month without deflection exceeding 21 mm
Temperature Range
Minimum / Maximum-35 °C / 40 °C -31 °F / 104 °F
Notes
Materials
Virgin High Density Polyethylene (HDPE), with metal reinforcements. The pallet is highly resistant to migration.
Handling
- Maximise the use of the pallet surface
- Minimise lifting from the undersides of the skids
- Rack the pallets under the outside blocks
- The pallet should not be directly racked from under the apertures of the pallet base, as shown in the figure opposite
Can be used on all materials handling equipment, designed for 800 x 1200 mm wooden pallet.
The pallet should not come into direct contact with the following substances: Benzene based compounds, Chlorine based compounds, Oleum, Nitric Acid, Bromic Acid, Methyl Bromide. (Please consult CHEP for specific advice).
It is the responsibility of all users and hirers to ensure that any other users to whom they pass on the pallet are advised of the contents of this specification sheet.
Performance and Standards
This pallet has been tested based on relevant parts of ISO 8611-1991, JISz 0606 and ASTM. D1185-94 Compliance
Please enter your details below