Automotive - 1000 x 600 mm Half Pallet (00062)

Download PDF

Share this page


Flush non-reversible four way entry 1000 x 600 mm wooden pallet

Features and Benefits

Improve handling flexibility and product security with four-way forklift access

Ensure superior product protection with robust design features and durability under load

Reduce supply chain costs – the Automotive Half Pallet is an industry standard and accepted by most European automotive manufacturers and suppliers

Minimise environmental impact and remove waste material from the supply chain with fully recyclable materials


Switch to imperial Switch to metric
  • Dimensions - in millimeters Dimensions - in inch

    1000 39.4
    600 23.6
    144 5.7
  • Nominal Capacity and Weight

    Maximum load weight
    500 kgs 1102.3 lbs
    Tare weight
    14 kgs 30.9 lbs
  • Configuration and Stacking

    When empty, pallets can be stored 30 high on a level and solid base


  • Materials

    Timber: Portuguese maritime pine or equivalent

    Nails: Mild steel

    Paint: Blue water based emulsion

  • Handling

    Automotive pallets should not be pulled or pushed along the ground

    It is recommended that a 1000 x 1200 mm Automotive pallet acts as a ‘slave’ pallet in order to rack half pallet

    The Automotive half pallet should never be lifted from underneath the base boards

    Can be block stacked 4 high with up to 500 kgs on each pallet on a solid and level base

    Should be lifted by a fork lift truck through the windows

    Ensure that forks support the pallet without protruding

    Forks should always enter the pallet squarely

  • Performance and Standards

    All automotive pallets are heat treated to ISPM15

Find CHEP platforms

Select language


Not your country or language?

Change country

Automotive - 1000 x 600 mm Half Pallet | CHEP